AT8532

I0022513

Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Cardioid
Frequency response: 30-20,000 Hz
Low frequency roll-off: 150 Hz, 12 dB/octave
Open circuit sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum input sound level: 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical): 118 dB, 1 kHz at Max SPL
Signal-to-noise ratio: 67 dB, 1 kHz at 1 Pa
Phantom power requirements: 11-52V DC, 2 mA typical
Battery type: 9V
Battery current/life: 1 mA / 1000 hours typical
Switch On-flat, on-roll-off (phantom) | Off, on-flat, on-roll-off (battery)
Weight (microphone): 0.3 oz (8.5 g)
Weight (power module): 5.4 oz (153 g)
Dimensions (microphone): 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter
Dimensions (power module): 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
Output connector (power module): integral 3-pin XLRM-type
Cable: 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module